Side yard gates in North Vancouver deal with constant moisture, uneven ground, and daily wear. Over time, gates rot at the bottom, posts shift, and hardware starts to fail. If you are thinking about replacing a worn gate yourself, this guide walks through how a cedar gate with a solid support surround and keyless lock is typically built and installed.

Why This Type of Repair Matters

A failing gate affects more than just access. It impacts security, privacy, and how finished your yard feels. In North Vancouver’s wet climate, poorly supported posts and untreated wood can deteriorate fast. A properly framed cedar gate with pressure treated posts stays square, resists rot, and operates smoothly for years instead of months.

Tools Needed

1. 1. Shovel or post hole digger
   2. Level
   3. Tape measure
   4. Circular saw or miter saw
   5. Drill and impact driver
   6. Clamps
   7. Speed square
   8. Socket set or wrench
   9. Paintbrush or roller for sealing

Materials Needed

1. 1×6 cedar boards for the gate face
2. Cedar lumber for gate framing and bracing
3. 4×4 pressure treated posts
4. Pressure treated 2×4 for top support
5. Exterior grade screws
6. Black gate hinges
7. Keyless gate lock
8. Exterior wood stain or sealer
9. Concrete mix for post setting

Safety First

Before you start, protect yourself with basic PPE (Personal Protective Equipment).

1. Safety glasses
2. Gloves
3. Dust mask or respirator

Step 1: Remove the old gate and surround

Using a drill and pry bar, remove the existing gate, hinges, and surrounding framing. Old fasteners are often rusted, and rotted wood can split unexpectedly, so eye protection and gloves are important here.

Step 2: Set new pressure treated posts

Dig post holes using a shovel or post hole digger, then set the 4×4 pressure treated posts plumb with a level. Concrete is added to lock them in place. If these posts are even slightly out of alignment, the gate will never hang correctly.

Step 3: Install the top support frame

Cut a pressure treated 2×4 to length with a circular saw and fasten it across the top of the opening using exterior screws. This top support keeps the frame rigid and prevents movement over time.

Step 4: Build the cedar gate panel

Lay out the 1×6 cedar boards flat and assemble the gate frame around them. A diagonal brace is added from the bottom hinge side to the opposite top corner to prevent sagging. Clamps and a speed square help keep everything square during assembly.

Step 5: Hang the gate and install hardware

Position the gate in the opening using clamps and a level, then attach the black hinges on the fence side. Install the keyless gate lock using a drill and manufacturer template, carefully aligning the latch with the post.

Step 6: Seal and finish the wood

Apply an exterior grade stain or sealer with a brush or roller to all exposed cedar. This step protects the wood from moisture and UV exposure, which is especially important in North Vancouver’s damp conditions.

Why North Vancouver Homeowners Choose Microworks Handyman

Microworks Handyman installs custom cedar gates throughout North Vancouver with a focus on proper framing, clean alignment, and long term durability. We understand how local weather affects wood and build gates that stay solid, secure, and easy to use year after year.

If you want it done right without trial and error, we are ready to help.

Before Hiring Any Handyman, Make Sure They Have:

1. WorksafeBC coverage
2. Valid business license
3. Liability insurance
4. Warranty offered on work

Need Help With a Cedar Gate Installation in North Vancouver?

If you would rather avoid digging post holes, aligning heavy gates, and fine tuning hardware, Microworks Handyman can handle your cedar gate supply and installation from start to finish.

Contact Microworks Handyman to schedule your cedar gate installation in North Vancouver.